IInstallation and Handling

Applications in Interior and Exterior

For applications in exterior, Light Tape must be mounted inserting the lamp inside one plastic extrusion or under a lens of acrylic. This allows the contraction and expansion while the conditions of the ambience change about the lamp. Also an additional protection level with beams UV and moisture it provides a way of mounting the lamp.

For applications in interior it is possible to use the extrusion or simply double adhesive tape face or Velcro.
The following ones are some examples of used extrusions but please one contact with us to obtain help in the design of an ideal answer of assembly for his application

Connection Guide

New revolutionary connection system for interior and exterior use that was designed pair to provide a hermetic stamp for the water, patents in step.

1. Court with a fork the lamp to the wished length.
2. Isolate the cuts with insulating tape.
3. Position contacts at the bottom of the lamp.
4. Press firmly with a top tweezer.
5. Turn the lamp and make sure that the contacts should penetrate the plate and they are double.
6. Peel the protective tape of a side of the connector.
7. Position the connector housing so that the contacts are a 1/4" sides.
8. Peel the protective tape of another casing of the connector and press firmly together to achieve a good insulation.
9. Fit the screws and pull firmly to insure itself a good insulation.