DECORATIVE LIGHTING

REF: ML-LN*-24V / REF: ML-LN*-230V

Through the technological research and development work of more of 3 years, finally it has become possible to make a product that competes straight in services with the neon and it has overcome the weaknesses skills of the same one. We refer to the creation and manufacture of the LEDNEON to substitute the conventional crystal neon.

Comparing the Led Neon with the conventional crystal neon, to stand out between others of his advantages, the following ones: it is easier to cut, it can angles are doubled in any to hand, the installation time it reduces greatly, there is no heat issue, it is resistant to impacts and vibrations.

LED NEON is a product that looks like a neon pipe in high tension for his visual capacities, but without his disadvantages of fragility and maintenance.

The LED NEON is a new flexible linear profile equipped with diodes electroluminescent of "high intensity" offering a diffuse visual aspect as the neon.

Comparative of saving: Based on length of 100m, for the Red color. The energy saving is based on expenses per hour of kilowatt, 24 hours per day, 365 days per year. Use of energy - traditional neon of crystal: 8.75W/FT, LEDNEON FLEXIBLE:2.16W/FT (R, Y, O) o 2.4W /FT (B, G, W).

. Avoid unnecessary risks at the time of the Led set neon in location and heights, we recommend continue the measurements safety established officially for this assembly font.

. The use of Led Neon supposes a brought near energy saving of more of 70 % opposite to other conventional sources of light.

. The flexibility of the LEDNEON allows to realize all kinds of outlines, murals... there can become doubled even in a radio minimum of 4cm, can to be cut also in any length on the bookmark or indication of court point.

. In contrast to the neon with very high functioning voltage 15.000V, Led Neon transmits entire safety working to low voltage 24.

. His transport is more trustworthy, due to his hardiness.

The LEDNEON is a product of lighting versatile and easy to use. It can be cut, doubled and easily set on the flat surface of several materials, like the wood, the plastic, the steel, or the wall, etc. different designs can be realized depending on the elected project. His connection to the energy source like proper interhookup is really simple.

	FEATURES
	IP44
	Case of spreading PVC with processing anti-UV
	Lenght:	50m in 24V, 50m in 230V
	Divisible:	0,10m and 0,076m in 24V
		1,52m and 0,91m in 230V
	Consumption:	6,5W/m and 7,2W/m in 24V
		4,7 and 6,6W/m in 230V
	Maximum length for feeding of 4A:	10m in 24V and 50m in 230V